PCB - перевод на русский
Diclib.com
Словарь ChatGPT
Поиск в словаре Индивидуальные решения
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология
  1. Словари
  2. Англо-русский словарь
  3. PCB

PCB - перевод на русский

WIKIMEDIA DISAMBIGUATION PAGE
Pcb; PCB (disambiguation)
Найдено результатов: 22
PCB         
сокр. от printed circuit board печатная плата
PCB         

общая лексика

(process control block) БУП

блок управления процессором

синоним

PC board (printed circuit board)

Смотрите также

circuit board

circuit board         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up

общая лексика

печатная [схемная] плата

основа печатной платы - стеклотекстолит, представляющий собой спрессованные листы стеклоткани, пропитанные эпоксидной смолой. Поверхность печатной платы покрывается медной фольгой, из которой с помощью фотошаблонов и химического травления получают сигнальный слой с проводниками, соединяющими контактные площадки для микросхем. Печатные платы могут состоять из нескольких сигнальных слоёв: плата с одним слоем называется односторонней, с двумя - двусторонней, с четырьмя и более - многослойной. Связь между слоями осуществляется, как правило, с помощью металлизированных отверстий. Питание и масса (земля) в целях защиты от электромагнитных наводок между линиями обычно выносятся на отдельные слои

printed circuit         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up

общая лексика

PC

печатная [электронная] схема

Смотрите также

PCB

PC board         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up

общая лексика

printed circuit board

Смотрите также

PCB

circuit board         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up
печатная плата
printed circuit         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up
[элк.] печатная схема
printed-circuit board         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up
печатная плата
circuit card         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up

общая лексика

плата модульной конструкции

printed circuit board         
  • via]], visible as a bright copper-colored band running between the top and bottom layers of the board.
  • A cordwood module
  • The two processing methods used to produce a double-sided PWB with plated-through holes
  • An example of hand-drawn etched traces on a PCB
  • Cordwood construction was used in [[proximity fuze]]s.
  • Proximity fuze Mark 53 production line 1944
  • Eyelets (hollow)
  • vias]] (the through-hole paths to the other surface), and some electronic components mounted using through-hole mounting
  • A PCB as a design on a computer (left) and realized as a board assembly populated with components (right). The board is double sided, with through-hole plating, green solder resist and a white legend. Both surface mount and through-hole components have been used.
  • A board designed in 1967; the sweeping curves in the traces are evidence of freehand design using adhesive tape
  • PCB with test connection pads
BOARD TO SUPPORT AND CONNECT ELECTRONIC COMPONENTS
Printed circuit; Circuit board; PC board; Circuit Board; Printed wiring board; Printed circuit boards; Power plane; Printed Circuit Board; Circuit boards; Circuitboards; Power Plane; Printed wiring boards; Printed circuit assembly; Printed Circuit Board Assembly; Circuitboard; Printed Circuit Design; Printed circuits; Circuit card; Circuit Card Assembly; Printed circuit board assembly; Printed Circuit Boards; Breakout board; Heavy copper; Through-holes; Heavy Copper; Etched circuit; Insertion Mount Technology; Insertion mount technology; Conductive trace; 20-h; PCB Assembly; PCB trace; PCB traces; Signal traces; Printed-circuit board; Printed-Circuit Board; Printed-circuit Board; PCB design; Printed circuit board design; Pcb design; Circuit card assembly; PCB CAM; Miniature PCB; Copper-clad laminates; Printed Circuits; PCB (electronics); PWB (electronics); PCB layout; PCB fabrication; PCB manufacturing; PCB assembly; PCB fabricator; PCB manufacturer; PCB assembly vendor; PCB assembler; PCB assembling; PCB designer; PCB assembly shop; Rigid printed circuit board; Rigid board; Rigid PCB; Rigid RWB; Rigid printed wiring board; PCB panelization; PWB panelization; Panelization (PCB); Panelization (PWB); Panelization (electronics); PCB panel; PWB panel; Panel (electronics); Multi-panel (electronics); Multipanel (electronics); Multi-panel (PCB); Multipanel (PCB); Multi-panel (PWB); Multipanel (PWB); PCB multi-panel; PCB multipanel; PWB multi-panel; PWB multipanel; Electronic circuit board; PCB electrical test; PCB E-test; PCB E test; Electrical test (PCB); E-test (PCB); E test (PCB); Bare-board test; Printed circuit panel; Copper thickness; Copper weight; Cu thickness; Cu weight; 0.5 oz/ft²; 1 oz/ft²; 2 oz/ft²; 3 oz/ft²; 0.5 oz/ft^2; 1 oz/ft^2; 2 oz/ft^2; 3 oz/ft^2; 150 g/m^2; 300 g/m^2; 600 g/m^2; 900 g/m^2; 150 g/m²; 300 g/m²; 600 g/m²; 900 g/m²; 1/2 oz/ft²; 1/2 oz/ft^2; ½ oz/ft²; ½ oz/ft^2; 17 µm copper; 17.5 µm copper; 18 µm copper; 34 µm copper; 35 µm copper; 70 µm copper; 105 μm copper; 0.5 oz (copper weight); 1 oz (copper weight); 2 oz (copper weight); 3 oz (copper weight); Circuit-boards; Printed Circuit Board (PCB); Green wire; "Green" wire; Layer stack; Printed Wiring Board; PWB design; PCB construction; PWB construction; Stack-up; PCB stack-up; PWB stack-up; PCB layer stack; PWB layer stack; P.C. board; PCB material stack-up; PCB layer stack-up; Material stack-up; Layer stack-up
печатная плата

Определение

ПЕЧАТНАЯ ПЛАТА
пластина из гетинакса, текстолита и т. п., на металлизированной поверхности которой каким-либо способом (напр., фотохимическим) создаются тонкие электропроводящие полоски для соединения устанавливаемых на плате резисторов, диодов, конденсаторов и т. п.
Показать больше определений

Википедия

PCB
Как переводится PCB на Русский язык
Поиск в словаре
Все словари Английский словарь Англо-арабский словарь Англо-голландский словарь Англо-греческий словарь Англо-испанский словарь Англо-итальянский словарь Англо-немецкий словарь Англо-русский словарь Англо-французский словарь Арабский словарь Голландский словарь Греческий словарь Испанский словарь Итальянский словарь Итальянско-русский словарь Латинско-испанский словарь Латинско-португальский словарь Немецкий словарь Португальский словарь Португальско-русский словарь Русский словарь Французский словарь Французско-русский словарь
Создано ИИ
Английский Русский Испанский Португальский Немецкий Французский Греческий Голландский Итальянский Арабский
Язык интерфейса
Русский English Español Português Deutsch Français Ελληνικά Nederlands Italiano عربي
Контакты
Свяжитесь с нами



Конфиденциальность
Политика конфиденциальности